loading
reading
writing
saving
searching
FARM EQUIPMENT & MISC - $11 (LaKe wYLie)
QR Code Link to This Post
.
TRACTOR WHEEL WEIGHTS – F&H brand, model DP2628 tractor wheel weights. Have multiple mounting holes so they may fit multiple makes. I saw some John Deere fits mentioned with this part number. They measure about 22” diameter, about 2” thick, and with 8-1/4” center hole. 135 lbs each/270 lbs total weight, adds to your pulling traction. $180 for the pair.
.
HYDRAULIC LOADER PUMP – Front mounted tractor hydraulic pump. 7/8" keyed shaft. Attaches to crank with Lovejoy connector, not included. Turns freely. $140.
.
CASTER WHEELS – 2 each 8” rigid, and 2 each 6” ball bearing swivel, caster wheels. Metal hubs, and very heavy duty. With grease fittings. $10 for set of 4.
.
1941 CHEVROLET SPECIAL DELUXE CAR – 1941 Chevrolet, model Special Deluxe, 2 door coupe. 6 cylinder engine, with 3 speed transmission. Built in Atlanta, May of 1941. Most, if not all, of the chrome is there. Bumpers, and all 4 hubcaps, are there. I have not yet put a battery in it, nor tried to start it, but was represented as running within past couple years. No title. $2800.
.
TRUCK BED UTILITY TRAILER – 5-1/2’ X 8’ International truck bed, converted to a utility trailer. Maybe a ¾ ton chassis due to wheel size. Has tailgate. Single axle, with springs, 1-7/8” ball hitch. Tongue is bent, but can be fixed, or pulled fine as is. $250.
.
BUSH HOG BLADES – Various sizes of matching rotary cutter blades, from old tractor dealership. Never mounted, new old stock. Will fit many different brands. $50 for any size matching pair.
29”x3-1/2” with 1-1/2” hole
28”x5” with 1-7/8” hole
30”x4” with 1-1/2” hole
28”x4” with 1-1/2” hole
25”x4” with 1-1/2” hole
24”x3-1/2” with 1-1/2” hole with double cutting edge
28”x3” with 1-1/2” hole (slightly used)
18-1/2”x3 with 1-½” hole, Woods brand, P/N 15790. Flat blade.
.
CASTER WHEELS SET – 2 each 10" rigid wheels on axle, and 1each 6” swiveling wheel. Very heavy duty. Was being used on a heavy welding machine. $10 for the set.
.
HEAVY DUTY HINGES AND LATCHES – 8” Tee hinges and 3 latches. Tee hinges measure 5-1/2” butt and 8” strap, for 10” total length. Three hinges and three latches. Great for heavy barn or shop door projects. $12.
.
BUMPER HITCHES – Bumper hitches. For truck or farm. $10 each.
.
3PH DRAWBAR LOCK BRACKET – Stabilizer locking bracket for 3PH drawbar. Fits most tractors. $20.
.
PIN HITCH – Pin hitch for many applications. Tractor, farm, trailer, truck, etc. Extra heavy duty. $10.
.
CEMENT FLOWER POTS – 3 old and heavy cement patio planter flower pots. Square, round and rectangle shapes. One has a chip under one corner as shown in the pictures. $40 for all 3.
.
NEW PTO SHAFT WITH SLIP CLUTCH 43”-57” – New PTO shaft with slip clutch. Both ends are 1-3/8” splined couplings. They will adjust from 43” to 57” or be shortened more by cutting. Has anti-snag safety cover. Will work great with tillers or other implements that require splined fit up. The length can be shorten if required for smaller compact tractors. Compare to $569 at Tractor Supply. $220.
.
NEW PTO SHAFT 43”-61” LENGTH – New Series 4 PTO shaft. Tractor end is 1-3/8” splined and the other end is round and drilled for a shear bolt. They will adjust from 43” to 61” or can be shortened by cutting. Has anti-snag safety cover. Good for bush hog rotary cutters, finishing/grooming mowers, etc., that need a little longer shaft. The length can be shortened if required for smaller compact tractors. $130.
.
LWTM